1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc modify the disc brake husqvarna wr 125

Discussion in '2 Stroke' started by Roberto, Dec 7, 2013.

  1. Roberto Husqvarna
    AA Class

    Location:
    Lagoa Formosa (MG) Brazil
    Husqvarna Motorcycle:
    Husqvarna WR125
    Other Motorcycles:
    Honda CRF250X
    what you think disco de freio 01.jpg disco de freio.jpg 2013-09-12 20.22.06.jpg 2013-09-12 20.22.25.jpg
    Roberto, Dec 7, 2013
    #1

  2. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Waterjet? Looks good but i would have done twice as many holes.
    Motosportz, Dec 7, 2013
    #2

  3. fredd Husqvarna
    AA Class

    Location:
    PUERTO RICO
    Husqvarna Motorcycle:
    2016 kx 450f
    Other Motorcycles:
    1995 chopper
    fredd, Dec 10, 2013
    #3

  4. Roberto Husqvarna
    AA Class

    Location:
    Lagoa Formosa (MG) Brazil
    Husqvarna Motorcycle:
    Husqvarna WR125
    Other Motorcycles:
    Honda CRF250X
    the original disc brake year of my bike and very ugly, hence the idea of ​​drilling holes, I thought it turned out great
    Roberto, Dec 12, 2013
    #4
    fredd likes this.

  5. fredd Husqvarna
    AA Class

    Location:
    PUERTO RICO
    Husqvarna Motorcycle:
    2016 kx 450f
    Other Motorcycles:
    1995 chopper
    you did a good job looks great.:thumbsup:
    fredd, Dec 12, 2013
    #5

  6. Roberto Husqvarna
    AA Class

    Location:
    Lagoa Formosa (MG) Brazil
    Husqvarna Motorcycle:
    Husqvarna WR125
    Other Motorcycles:
    Honda CRF250X
    Glad you liked it
    Roberto, Dec 13, 2013
    #6

  7. Bart Husqvarna
    AA Class

    Location:
    The Netherlands
    Husqvarna Motorcycle:
    2008 TC450, 2006 WR250
    Other Motorcycles:
    2009 TM Racing EN300 and EN450
    I'm not a big fan of vented rotors with small holes, they tend to hold dirt and eat brake pads.
    The solid rotor is great, but the floating bit is what I don't like, they rattle like hell especially when worn.
    Bart, Dec 13, 2013
    #7

  8. Roberto Husqvarna
    AA Class

    Location:
    Lagoa Formosa (MG) Brazil
    Husqvarna Motorcycle:
    Husqvarna WR125
    Other Motorcycles:
    Honda CRF250X
    they really make much noise even
    Roberto, Dec 13, 2013
    #8