MX3 France

Discussion in 'Racing' started by robertaccio, Apr 28, 2010.

  1. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    23 Salvini TC450, 5 Martin TC450, 289 Irt TC250

    note in both starts Irt is near the holeshot, inside Pichon HON in one and very near the front in the other. pretty good for an underpowered 250 (+??)........against a field of mostly 450cc (and plus) bikes.

    http://www.motocrossmx1.com/gallery/default.aspx?aid=587
  2. PeterHB Husqvarna
    AA Class

    Location:
    Sweden
    It´s not Jarnej Irt, it´s his bigger brother Matevz Irt. And his ride is a TC450.
    You are not allowed to run a 250F in the MX3 championship, minimum is 450cc.
  3. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    FIM regulations for 2010 MX

    Page 32

    MX3 290-500cc 2T
    475-650 4T


    MX1 and MX2 motorcycles may also participate in MX3

    that about covers every full size bike out there. MX3 is a run what you brung class. As for the riders I went by the results of the MX3 that have rider names and numbers, then looking at the photos of the MX3 event, it looks like the bike of M Irt is a TC250. His bike looks like a single pipe bike so I took it for 250,,,, does Akropovic or another make a close to the head 2 into 1 collector???