All 2st my bike is flooding out

after a rebuild.

it wants to flood really bad. if i can get it started and running its only when the choke is on. if i turn it off it slowly dies out. if leave the choke on itll run but once you get into the upper mid range it floods out and dies.

ive taken the carb apart and im thinking that the needle and the slide is worn where the needle slides through the slide. the only other thing im not sure about is my v-force reeds. im not sure if i put the peddle holders on the right way. would that cause these symptoms?

ive though about taking the carb off my 200 to see if that makes a difference.

if there are any other ideas throw them out there and see what sticks. ive checked a few other things chasing this around.