125-200cc my brand spankin new to me old abused 125

thats rite i finally got what i waited over a month for...dunno what will come of it hopefully not too much money to be sunk into it. i dont know what year it is. its a right side kicker, i heard 94 or 95 and also 01 or 03 or 05 im putting a shot of the frame numbers up if somone could tell me some info. thanks in advance.

It is a prior year to the major motor re-design in the late 90's. So your first estimate of 94/95 is going to be close.

thanks wally! 120 bucks for it. the more i look at it the more i wonder why lol i think i can get it in acceptable riding shape for about another 500 or so bucks i hope.

At least you won't have to worry about putting the first scratch on it

Don't that seat big, wide and comfy?

lol unfortunately thats one of the things thats needs attention theres very little padding in that thing..... lets see need a head and probably some nuts n bolts, a piston kit, seat recussioned, brake and clutch cables the list is getting bigger

Yellow fork guards say '93. Is rear fender white or weird green/yellow? I can't tell in the pic.

its white, that means its the fast one rite lmao

I hope this does not delay the track building too much

oh not at all lol i was on it tonight tryin to hang with a cpl 17 yr olds on 2strokes, doin fine but the corners are my weakness, get goin too fast to slow down and they take the inside on me. im goin to get a smaller counter sproket tomorrow and see if that helps some.....

Maybe or put a big a$$ berm on these corners and rail the outside at high speed ...

Or slide the fork tubes up some to help with your turning....

PS -- there was ~13 yr old blowing me away a few weeks back ... I need to practice with him and copy his speed ...

yes i do need burms on the corners for sure. i need to loose some weight too hahaha i bet i have a good 70 lbs and the lil skinny dudes

U got a 450, right? They need weight for traction ... Those young guys probably need to be 450 roosted a couple times and then you can gain some respect

lmao

Its a 1993. Parts will be same as a 92 also. 92/93 only change was seat cover graphics and the yellow guards in 93. Motor will be same up to 97. Pipe for it is 92-93. 94-95 had criss cross pipe. I think I have a dyno port pipe for it. iterested?

joe, thanks for the info! ill have to look to see what pipe he brought with it, i cant remember what he said it was. so the years 92-97 are all interchangeable or just the engines??

No criss cross pipe on the '94... I'm looking at the Trail Rider mag trail test right now. Likr Joe and I said, it's a '93. '94 would be similar, except puke green/yellow plastic, no kevlar strip on lower seat cover and weird blue fork guards.

My '93 WXC350.....

This '93 model is the last of the single rear downtube frames? That seat looks like a seat! And its got that single locking bolt in the rear ....

The single downtube frame lives on in the 630 today and went as far as '04 in the 570. The Dzus seat fastener started with '92 models.

i was checkin the seat out last night, it appears at least from what it feels like someone hacked the hell out of it so they could touch the ground im guessing. also mine is a right kicker not left???
hey norm ill trade ya nice bike