1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Need bar risers TE250 2006

Discussion in '4 Stroke' started by jessehere, Mar 9, 2009.

  1. jessehere Husqvarna
    AA Class

    Location:
    nj
    Anyone have the part number for a oem riser ( spacer) for the bars. My back is killing me.
    thx
    jessehere, Mar 9, 2009
    #1

  2. Norcalslowpoke Husqvarna
    AA Class

    Not sure if this will help, but I cut off the ends of my stock bars and bought some longer bolts for a quick fix.

    [IMG]
    Norcalslowpoke, Mar 11, 2009
    #2

  3. Eurofreak Husqvarna
    AA Class

    Location:
    Western NY
    Husqvarna Motorcycle:
    1986 TE 510, 1982 CR250, 2008 WR250
    Other Motorcycles:
    70's Triumph , Bultaco , Maico, etc
    Not a bad idea but they may flex a bit when you crash. I bought the Rocky Mtn universal risers for ~$35-work well. higher bars help a lot too.
    Eurofreak, Mar 11, 2009
    #3

  4. HuskyDude Moderator

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    13/TR650
    Other Motorcycles:
    10/EC300, 76/TY175
    When I made these at work out of 1" aluminum round stock.
    I believe Jeff from Tasky's came back on line and said Husky make some OEM risers for a reasonable price. Start there.

    [IMG]

    [IMG]
    HuskyDude, Mar 11, 2009
    #4

  5. Norcalslowpoke Husqvarna
    AA Class

    You know, they might flex a bit more than the stock ones, softens the bumps a bit...but, I think I'll try something else.

    Cheers
    Norcalslowpoke, Mar 11, 2009
    #5