250-500cc Need help identifying this bike

Hi. i have problem to identifying my husqy cr 250 83 ? 87 ?

Engine -1614496Heads -1614498 /69,5 x64,5
Frame Olny " HUSQVARNA 1 "

86 87

yours is 85-86 style..87-88 have white tank wrap shrouds...looks like a cr going by the carb and rear brake stay...

any posts for this should be in the vintage left kick section...this bike is a swede!

it does belong in the vintage, although a lot of bikes here are too
Sweedish vintage
on the engine is the 4 digit then another 4 digit number to determine what it is, also on the frame head CP is motocross, that is as memory serves, I still have a ton of these

Tank was White somebody paint to black , flat carburetor

Other photo

this is for threads about 1989 and newer 2 stroke Husqvarna motorcycles made in Italy
the proper place to discuss a 1985 or 86 is under Sweden then vintage left kickers, here is a link

http://www.cafehusky.com/forums/vintage-left-kickers.63/

Thx for Help eweryone btw Happy new year

are these pics after you have been working on it? it sure looks better than the first pics...is it a big bore? cant see really but jug looks bigger than 250? 400?

yes, all 85-86 have white tank, 87-88 are black tank...for 2 stroke anyway

Beside the kick leaver is the eng number
Frame number is on the steering head
It's 85/86

YEP 85/6 CR

I believe it is a 1986. How many speeds is the gearbox ?

Could be 4sp or 6sp

Hi again , i have problem with ignicion Motoplat . i adjust 2.55mm be4 GMP ,i have Use google trans..

Hi, I have a problem with the ignition control Motoplat, I set marks with the marks of the rotor stator ahead 2.55m before dead Punkt, kick-starter kicked - premature ignition. previously was set at dead center without notice. did not know what was going on, now motorcycle no power: (

OK WHO SPEAKS POLISH WHATS A PUNKTI? LOL

This GMP death postion pistol

motor looks clean as heck. Whats the point?

You want to know how to set the timing?

the cylinder pictured is not the one from this bike...i think hes just trying to illustrate tdc..