I have a 2014 TE511 and the bike keeps giving me this code and wont run. It ran good untill i ran out of gas about a mile from my campsite. filled it up and started to ride for about a mile and it shut off. i have tried to reset it from reading other posts but noting seems to work. any ideas?
i had a similar problem look at the electrical connector that comes of the valve cover into the spark plug should have three wires coming off of it those wires arced on my bike because oil overflowed into the airbox and seeped out onto that connector i re wired it and filled the conector with rtv on the side with the wires coming out so oil wouldnt get in anymore ive put 9600 miles on it and its holding. not sure if this is you problem but its worth a look ill post a pic when i get home
That E code is just the calibration number for the dash. Engine codes can only be seen with the dealer diagnosis software HST. Check the regular things like spark at the spark plug, can you hear the fuel pump run (give the start button a quick touch, then release, you should hear the pump whirring). Check the fuses. Try swapping the relays to different positions (They are all the same p/no.) If these are ok, it's possible the filter 'sock' on the fuel pump is blocked, or an electrical fault.
