250-500cc Need new pipe!!

Im going to need a new pipe....The only problem is they dont make them Mine has some cracks in it and am going to have it welded. I was looking at these and thought i might be able to make one work? What do you think? http://www.ebay.com/itm/DG-Honda-CR...Parts_Accessories&hash=item25820f6617&vxp=mtr

and heres a picture of mine

whats wrong with that? weld it up! doesnt look like there are many dents at all

the bracket on the bottom of pipe broke loose from someone else welding it and theres probably a 1 1/2 1/2 inch hole there ans around it its starting to send off some small hairline cracks. Its been welded a couple times before. I was just looking for possibilities in the future. Im definitly gonna get it welded and use it but if it does break or get dented im gonna look at other possibilities. I was also wandering if it would be possible to convert it to a new style of pipe thats lower?

you will need to repair yours till you find a replacement, it was a one off bike, the 240 and 250 of the earlier years with a similar pipe went out the other side
yours is not common with the 92 on either, plastic is different so not just any pipe will fit, if you want it to look like it belongs you need a replacement of the same bike or a custom built one, butchering a pipe from another brand might also have tuning issues in the end

have someone skilled weld it..maybe add some rubber damping or springs to cushion it to keep it from happening again