1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Needle jet removal

Discussion in '2 Stroke' started by rockdancer, May 30, 2016.

  1. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Can anyone advise how to remove the needle jet - needle nozzle ?
    ie thing that needle sits in

    After removal of main and emulsion tube can it be pushed up or down ? Turned?

    I am wanting to change it for a richer ( S9) one
    as after research this seems to be the ticket for Wr300s ( JD kit )

    Also wondering why not just try a richer needle

    Wr 300 is running well on 4th clip with Ghey needle 420 main and 40 pilot
    Didn't like 3rd clip was sounding lean - running on .
    rockdancer, May 30, 2016
    #1

  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    U can rite gay on this site mate!;)

    GAY, gay, Gay.

    See.
    shawbagga, May 30, 2016
    #2
    rockdancer likes this.

  3. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    THEY PUSH OUT FROM THE BOTTOM THEY HAVE A LITTLE ALIGNMENT PIN LIKE A ROUND SLIDE CARB
    troy deck, May 30, 2016
    #3
    rockdancer likes this.