New Husky owner

Discussion in 'Older Single cams' started by omigod, Aug 15, 2015.

  1. omigod Husqvarna

    Husqvarna Motorcycle:
    TE610
    Other Motorcycles:
    Fireblade
    Hi all, I'm the proud new owner of what may well be the worst maintained/most neglected TE610 in the UK.
    It's a 2001 registered left kicker and is possibly too far gone to make it worthwhile but I'll find out more as I get it stripped.
    From what I know the kickstart shaft has snapped, the wiring is a total rats nest, the rear shock is not a shock but just a spring and 3rd gear is just another neutral.
    It does have some good points such as a Keihin FCR 41 and a set of Husky USD forks and a bunch of spares.

    So a few spares needed and lots of stupid questions to be asked - be prepared.

    [IMG]

    [IMG]
    johnhuskywaine likes this.
  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    You are correct about the condition, the former owner should be jailed as an idiot. :)
    Dirtdame likes this.
  3. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    doesnt look too terrible, we restore much worse looking in the left kicker forum. i know looks can be deceiving however. i bet it was a sweet machine when it was in better nick, hope you can restore it. keep us posted with lots of pics if you go that route.
  4. omigod Husqvarna

    Husqvarna Motorcycle:
    TE610
    Other Motorcycles:
    Fireblade
    I got the top end and clutch off now and they're not the best but could be a lot worse.
    Strangely I thought there was a lot of play between the clutch basket to gearbox input shaft, when I took the basket off the center bush was loose and could be pushed out by hand, I don't think this is normal.

    As usual the cost and availability of spares will be the deciding factor, I don't mind doing the work as it'll keep me out of trouble over the winter.

    Hopefully I'll get the gearbox in bits tonight and see where 3rd gear has gone!
  5. omigod Husqvarna

    Husqvarna Motorcycle:
    TE610
    Other Motorcycles:
    Fireblade
    [IMG]

    Well 3rd gear is still there, however a missing spacer on the mainshaft is allowing the one of the gears to float on the shaft and become un-selectable.
    Spacer should be between the top 2 gears. The part number is 1612-48101 are there any UK suppliers of parts like these?
  6. Andy clark Husqvarna
    A Class

    Husqvarna Motorcycle:
    1997 te610
    Other Motorcycles:
    Suzuki gsxr1000 k6 honda c90
    I had the same lol mine was a right mess! Neutral return spring gone so the gear lever was floppy. Kick start paw snapped off the engine cover and the shaft bent! Brake fluid like water lol carb needed a rebuild and the plastics were a mess / most bolts missing. Got it all back together now image.jpg
  7. Andy clark Husqvarna
    A Class

    Husqvarna Motorcycle:
    1997 te610
    Other Motorcycles:
    Suzuki gsxr1000 k6 honda c90
    Husky sport in Hampshire can get most bits very fast there a main dealer