New Kawi Bajaj Rouser bike

Discussion in 'Non-Husqvarna Motorcycles' started by ray_ray, Feb 19, 2015.

  1. ray_ray Mini-Sponsor

    Location:
    The Philippines
    Husqvarna Motorcycle:
    08\013 WR250, 010 TC250, 012 TC250
    Here is the new Rouser 200cc bike. Seen lots of them here but this is the first Bajaj bike I've seen here that is water cooled ... Pics are a little bad but good enough you can see the details ....

    Also notice the branding on this new model bike as compared to the other Bajaj Kawi bikes pictured below...

    Kawi name sits firmly on top of the Bajaj name in the prime location.
    108_0526_result_result.JPG


    Little better view of the radiator and center stand. Anyone remember the center stand? lol I luv living on the back side of the wave.
    108_0529_result_result.JPG


    The mono-shock.
    108_0531_result_result.JPG

    The price ...
    108_0527_result_result.JPG
    These numbers I sure are weird to ya ... To help a little bit here, my 2 bedroom APT is 4,500P per month ... ~$105...
  2. ray_ray Mini-Sponsor

    Location:
    The Philippines
    Husqvarna Motorcycle:
    08\013 WR250, 010 TC250, 012 TC250
    Here's the previous models types ... This bike looks new also but a 180cc bike ... No mono and no water here...
    108_0533_result_result.JPG

    108_0534_result_result.JPG


    That Kawi message here says 'assembled by Kawi' ... Meaning parts come into the country (to save on taxes) and there are assembled by Kawi. No real Kawi branding.
    100_0154_result.JPG


    This is the version bike I see here lots ... No preimeter frame on previous bikes ... Its a Japan thing on those frames..
    100_1559.JPG


    --

    Not too hard to follow that Kawi supplied new technology to Bajaj and got better branding on this initial model bike. But who knows? It's a small world really...
    .
    Big Timmy likes this.
  3. ray_ray Mini-Sponsor

    Location:
    The Philippines
    Husqvarna Motorcycle:
    08\013 WR250, 010 TC250, 012 TC250
    What will be interesting to me, is, will these new fangled water-cooled engines replace the air-cooled models that have the entire market almost, before I enter the carbon-cycle ... I'll go out on a thin limb here and say no for a few reasons.
  4. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    the real question is, do these water cooled motors they will see have a good power upgrade over previous mills?