1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc New pipe

Discussion in '2 Stroke' started by rockdancer, Jun 30, 2021.

  1. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    I wasnt too concerned about my dented pipe until I watched a video from the IRC tyre guy about differences between a new and a dented pipe . ( a few horsepower on a 300)

    View: https://www.youtube.com/watch?v=-M4KrGQwKzY&ab_channel=IRCTireUSAMoto


    Decided to bite the bullet and get a new fatty for the 125. Fits real well . A nice gain in power . . especially up top as I think it was being restricted by the 3 or so dents.
    Fresh packing and it sounds nice sweet now .
    I still need that 144 kit ...:thumbsup:

    Attached Files:

    rockdancer, Jun 30, 2021
    #1
    steadydirt likes this.

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I don't even know where to get a Fatty FMF. I checked a few months ago and it looked like they had been discontinued. I couldn't find them on any suppliers websites, the manufacturers website or even Ebay.:(

    I did manage to get a like new stock pipe that Wallybean had laying around.
    Dirtdame, Jun 30, 2021
    #2

  3. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    There was one left here in OZ . It had been sitting around a while - needed a polish . I did see a few on ebay in the US I think .
    rockdancer, Jun 30, 2021
    #3

  4. webski Husqvarna
    AA Class

    Location:
    Kansas
    Husqvarna Motorcycle:
    83WR250-09TXC450-13WR250-09WR165
    Other Motorcycles:
    KTM 200 XC - Honda XR 440
    I have a Fatty in good condition Dirtdame, if you need one.
    webski, Jan 20, 2022
    #4
    Dirtdame likes this.

  5. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    I did find a OEM one in perfect (take off) condition and at a really good price, so I jumped at it. Not looking for anything at the moment, but thanks for chiming in.
    Dirtdame, Jan 20, 2022
    #5

  6. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    2premo, Jan 20, 2022
    #6
    Dirtdame likes this.

  7. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Thats a good price . Ive got two dents in mine already - pretty soft wall
    rockdancer, Jan 23, 2022
    #7

  8. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    I sent them an inquiry about one for my 250 asking if they were going to make them again since they're still listed and they said they are so busy they can't keep up with demand on the newer bikes. But they will eventually make some more.
    Huskynoobee, Feb 11, 2022
    #8
    Dirtdame likes this.