1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Not many sleeps left now until this comes home

Discussion in 'Vintage/Left Kickers' started by PEZBerq, Mar 28, 2015.

  1. suprize Husqvarna
    Pro Class

    Location:
    Bendigo, Australia
    Husqvarna Motorcycle:
    WR 400, bike in a box Moto Villa 350
    Other Motorcycles:
    ktm 300
    wildebeast90210 was his moniker...don't you luuurve oldtimers....
  2. everfree Husqvarna
    Pro Class

    Location:
    Bend, Oregon
    Husqvarna Motorcycle:
    86 430AE (2), 88 430AE, 87 430WR (2)
    Other Motorcycles:
    87 250 XC, 87 430 CR, '17 GG 300
    PEZBerq,
    I like your Acerbis front fender with the wide mud flap.
    White is a good color for the mud flap, I've seen them in blue.
    I'd like to find one in white.

    Where did you find the fender?
    Does Acerbis still make them?

    Thanks.
  3. PEZBerq Husqvarna
    AA Class

    Location:
    Brisbane, Australia
    Husqvarna Motorcycle:
    390AMX, 430XC, 240WR, 2x510TE, FE501
    I bought the Acerbis mudguard extender kit on my 85 510 from Huskydoggg (Steve Borejko) when he was selling Husky parts in Canada. I believe he has closed down/ sold out the business unfortunately. I sourced many juicy bits from him over the years.

    I bought another of my bikes with the fender kit installed. They are out there so keep an eye on eBay - both for the Acerbis kit and for a fender with it already fitted. Good luck. I also prefer the white extender kits on a white Husky fender. Blue is better in a Yamaha IT I reckon.
  4. everfree Husqvarna
    Pro Class

    Location:
    Bend, Oregon
    Husqvarna Motorcycle:
    86 430AE (2), 88 430AE, 87 430WR (2)
    Other Motorcycles:
    87 250 XC, 87 430 CR, '17 GG 300

    Ha, blue is better on a Yamaha!
    Thanks for the tip.
    I have some new Acerbis fenders, but a white mudguard would be cool. I may have to paint my blue mudguards. I have a rear fender w/ mudguard extender too. I've also seen pictures of a light gray mudguard, that would be cool.
  5. Michel Dufayard Husqvarna
    Pro Class

    Location:
    France
  6. everfree Husqvarna
    Pro Class

    Location:
    Bend, Oregon
    Husqvarna Motorcycle:
    86 430AE (2), 88 430AE, 87 430WR (2)
    Other Motorcycles:
    87 250 XC, 87 430 CR, '17 GG 300
  7. everfree Husqvarna
    Pro Class

    Location:
    Bend, Oregon
    Husqvarna Motorcycle:
    86 430AE (2), 88 430AE, 87 430WR (2)
    Other Motorcycles:
    87 250 XC, 87 430 CR, '17 GG 300
  8. PEZBerq Husqvarna
    AA Class

    Location:
    Brisbane, Australia
    Husqvarna Motorcycle:
    390AMX, 430XC, 240WR, 2x510TE, FE501
    Dave
    Try Halls Husqvarna. Raymond Devlin sourced me a full set recently. I think Andy at HVA Factory has them also. They won't be too hard to machine from a suitable donor guide also if worst comes to worst. Try Kibblewhite Engineering also.
    Good luck.
    everfree likes this.
  9. Michel Dufayard Husqvarna
    Pro Class

    Location:
    France
    Everfree, I think the 510 LC guide can fit. The part # is different from a AC, but I think it can fit.
    Basically the head is the same.
    Try and find a old husky dealer who can tell you.
  10. suprize Husqvarna
    Pro Class

    Location:
    Bendigo, Australia
    Husqvarna Motorcycle:
    WR 400, bike in a box Moto Villa 350
    Other Motorcycles:
    ktm 300
    pssst don't call them old....
    RUF likes this.
  11. Michel Dufayard Husqvarna
    Pro Class

    Location:
    France
    Experienced is better !
    To be old and Wise , you must first be Young and stupid !
    RUF, DaveM and everfree like this.
  12. everfree Husqvarna
    Pro Class

    Location:
    Bend, Oregon
    Husqvarna Motorcycle:
    86 430AE (2), 88 430AE, 87 430WR (2)
    Other Motorcycles:
    87 250 XC, 87 430 CR, '17 GG 300
    Thanks guys for the suggestions.
    I'll check them all out.

    Happy Holidays and a safe New Year !
    Dave