1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Odometer problems

Discussion in '2 Stroke' started by paddy.t, Jul 24, 2012.

  1. paddy.t Husqvarna
    B Class

    Husqvarna Motorcycle:
    WRE 125
    Other Motorcycles:
    Yamaha WR200
    Evening all, i have a wre 125 with a small problem. My odometer has stoped working for some reason, can anyone tell me where the sensor is located please?
    paddy.t, Jul 24, 2012
    #1

  2. lankydoug Husqvarna
    Pro Class

    Location:
    MO
    Husqvarna Motorcycle:
    WR
    Other Motorcycles:
    TM 300en
    The sensor picks up a signal from the front brake rotor. If the odometer is the same as my 09 WR250 you're wasting your time trying to get it to work. Do a thread search and have a look at how notoriously crappy the factory odometers are. I'm not complaining in fact I wouldn't have cared if it never had an odometer but if you want a good one you will probably have to purchase an aftermarket unit.
    lankydoug, Jul 24, 2012
    #2
    joedirt and huskybear like this.

  3. paddy.t Husqvarna
    B Class

    Husqvarna Motorcycle:
    WRE 125
    Other Motorcycles:
    Yamaha WR200
    Cheers for the reply, i did do a search and read quite a bit.


    Cheers
    paddy.t, Jul 24, 2012
    #3

  4. dfeckel Husqvarna
    AA Class

    Location:
    Medford, NJ
    Check your magnet on the brake rotor. My '08 CR 125 had the magnet come unglued from its keeper once. I thought I would need to buy a new magnet/keeper, but I found the original magnet stuck to the rotor a couple inches away from where it was supposed to be. A little epoxy and it's good as new.
    dfeckel, Jul 25, 2012
    #4

  5. paddy.t Husqvarna
    B Class

    Husqvarna Motorcycle:
    WRE 125
    Other Motorcycles:
    Yamaha WR200

    Cheers, ive checked that and all is fine. Must be an internal problem with tje computer, or the senson is knackerd.
    paddy.t, Jul 25, 2012
    #5