1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Oil feedback

Discussion in '2 Stroke' started by lankydoug, Mar 7, 2011.

  1. lankydoug Husqvarna
    Pro Class

    Location:
    MO
    Husqvarna Motorcycle:
    WR
    Other Motorcycles:
    TM 300en
    Bill at BMP was nice enough to throw in a pint if this oil in the crate before he shipped the bike to me. I'm getting ready to try it out with Sunoco 110 mixed 50% with 91 octane no alcohol pump gas. Does anybody have any experience using this http://www.spectro-oils.com/products/2stroke/platinumsx.asp [IMG] [IMG][IMG]
    lankydoug, Mar 7, 2011
    #1

  2. bigriver Husqvarna
    AA Class

    Location:
    Salem
    Good stuff. Ran it many bikes over the years. Try running the sunoco straight.
    bigriver, Mar 7, 2011
    #2

  3. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    Ive been using it in my WR300. Seems to work fine.
    oregonsage, Mar 8, 2011
    #3

  4. LawnDartMike Husqvarna
    AA Class

    Location:
    Salem, OR USA
    I switched from 927 to it on Bill's recommendation. Smokes less and less spooge mixed 32:1 in both my WR144 and the boy's KX85. I haven't had the top end off yet so I can't comment on ring, piston or cylinder wear. I like the blue color - I can tell when it is mixed.
    LawnDartMike, Mar 8, 2011
    #4