Open in injector circuit fail

Discussion in 'EFI/carb' started by motorider115, Sep 21, 2013.

  1. motorider115 Husqvarna

    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    02 Yz 125, Klx 110,07 R6
    I have a 310 that has an intermitten problem that's throwing the fail light. hooked it up to ibeat says open in injector circuit as the current fails. my question is, when that fail occurs does it shut off the fuel pump, I noticed that when the fail is on the dash, the fuel pump isn't pumping when I cycle the run/stop switch.
  2. OlderHuskyRider Husqvarna
    Pro Class

    Location:
    Austin, TX
    Husqvarna Motorcycle:
    2010 TE 450 - last of the ITA motors
    Other Motorcycles:
    Kwaka KLE, HD FXDWG
    Check your wiring diagram, on my bike, the Green with red stripe wire powers the fuel pump, the fuel injector and the coil.
  3. HUSKYnXJnWI Husqvarna
    AA Class

    Location:
    Central Wisconsin, USA
    Husqvarna Motorcycle:
    09TE450
    I worked on a 10TE450 that did that random injector circuit fail- yea the pump would not pump (very brief and intermittent), I cleaned up the connectors to the pump and injector and all was well- someone had filled the plugs with dielectric grease.