1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

oversized tank

Discussion in '4 Stroke' started by Wadman, Nov 26, 2009.

  1. Wadman Husqvarna
    B Class

    Location:
    south carolina
    I still want a larger tank on my bike. I also want to use the stock shrouds. I wonder if any of the other model bike tanks will fit on my 09 txc250? I just wonder why Husky uses such a small tank on the bikes.
  2. fitness2go Husqvarna
    AA Class

    Location:
    Seattle WA
    The only oversize tank available is the 3.1 gallon IMS tank. Many have modded their shrouds to adhere to the tank with varied results.
  3. Bykwiz Husqvarna
    A Class

    Hey Wadman,

    I put one of these IMS tanks on my 09 TE 510 and it has worked out awesome. Much better range (I even wish they made it a bit bigger, like stepped it up more like the Clarke tanks). I don't feel any extra weight or anything and it is such good peace of mind to be able to get 175 kms before fuel light comes on, then get another 25-35 kms on reserve...

    I ground my stock shrouds so they line up with the stock mounting bolts and tuck perfectly under the new IMS tank so yeah, this all works fine.

    Also, I've heard you can mod your stock tank shrouds and bond them to the IMS tank, but I'm trying something slightly different and having a graphic guy do up stock graphics that look like the stock tank shrouds but lay right on the side of the IMS tank, and actually transfer right down onto my rad shrouds too. It should tie in super nice if it works. I'll know in a week or so.

    ANd if it does, I'll figure out how to attach photos and share around contact information of this guy so anyone else with an IMS tank can get some nice red-white graphics kit if they want.

    Cheers Pete SS
  4. TE 450 Pilot Husqvarna
    AA Class

    Location:
    Ontario Canada
    [IMG]

    Our bikes with the IMS tanks. We had high quality decals made for the bike closer in the photo. Breathing holes punched in the decal to help them stay Better. Three months later the have turned yellow and are blistered and almost melted in places. A wast of money for us but by no means the fault of where we got the decals. I think the best bet is the shroud mod & we will be doing that over the winter.
  5. TE 450 Pilot Husqvarna
    AA Class

    Location:
    Ontario Canada
    Found a close up photo. Looks good when new. i think we will just get the same decals on a shroud.

    [IMG]
  6. johnnym Husqvarna
    B Class

    Location:
    South Africa
    I have a black IMS 15Lt tank on my 2t. Standard tank shrouds and Rad shrouds.
    the "white" or "clear" plastic always turns yellow and looks terrible after a while.

    As far as I know it is a "universal" 2T / 4T tank.

    In my opinion the black looks so much better.
  7. Sandgroper Husqvarna
    AA Class

    Location:
    Dubai
    Big question is, Will it fit the 09 TXC's that have a steering dampner???