Parts Bag w/2013 TE 310 R

The photo below shows some parts that came with my bike. 2 keys for steering lock, USB with manuals, lever covers and some items I am not sure of. Curious what the angle brackets are for, the machined cone shaped fitting, and the small white plastic rectangular plug (w/chain). Appreciate any info.

Tun signal brackets, thing with chain attaches to usb stick for sticking the cap on when in use.

Cool... Thanks!

The turn signal brackets are useful if you decide to remove that ugly black plastic contraption off the back of your bike. I have since covered up the shiny metal with 2" shrink tubing.

Here is what it looks like with the shrink tubing covering the brackets.

Cleans the tail it up well. I may do the same... I might try some some Plasti-Dip coating on the brackets.

Thanks. I think so also. I did not consider Plasti-Dip. That's a good idea. Post pics when you are done. If you are interested, I got the rubber license plate mount from BMP. It mounts using the taillight bolts, but I also zip-tied it to the fender stub under the plate to keep it from flapping around.

The lever guards were installed. Not sure if they were done on uncrating but will check if the cone washer was left off... Assumed those black bolts/nylocks were for the levers without the guards.