All 2st Parts crossover, cross reference, new owner

I've searched, but can not find the "infamous" cross reference post about what parts will crossover between models.

Which parts are you trying to crossover?

Shifter, sprockets, rad hoses, rads, all guards, brake discs and pads, pipes, wheel/swingarm bearings, clutch plates, cables. The usual generic items.

Brake pads are the same as KTM. Not sure about anything else.

I don't think the rear brake pads are the same. I ordered a set and brought the worn out set with me. Sure enough, not the same. We had to go through a book and find the correct shape of the pad, and order from there. The set I needed were much longer unlike the KTM's. Funny thing, like always, the book says what to order, and was wrong.

Kelly at motosportz will make sure you get the correct pads if you tell him which bike you have !!!

So is the company in Aus the only one that makes frame guards for the WR300?

Rear Sprocket on 2t is the same as GASGAS

Thanks for the info on the GG sprocket.

What I've found searching is the Husky 360 shares the same air filter at the WR250-300. Is that correct?

Clutch plates from 05 CRF 450 fit the WR250, just threw some in with a new Rekluse.

for what model year/years? way back to 1999 wr 250?

Rear sprockets are the same as a DRZ400 also.

Same for an 11' Wr300? I have always ran the worcs sprocket and they don't show them for my bike. If there is a cross reference link that would be great.

Any idea if there are other brands CS Sprockets that fit 2009 WR 250? Seems like both renthal and jt stop at 2008.

Suzuki DR 350 should also Fit!

I just ordered sprockets for an 09 WR300. Renthal front PN#293--520--13GP (13tooth) and JT rear sprocket pn# JTR822.50 (50 tooth) Should fit your 250 pretty handily. https://www.rockymountainatvmc.com