Parts Fiche?

Discussion in 'TR650' started by thumperstruck, Sep 21, 2013.

  1. thumperstruck Husqvarna
    A Class

    Location:
    Boise, ID
    Husqvarna Motorcycle:
    TR650 Strada
    So I took my Strada through a fence. Searched the site and googled the hell out of it. Can not seem to find a parts fiche. I need it to be able to order the replacement parts. I go through Hall's Cycles out of Illinois. Need part numbers. I have already ordered the Terra fender then this happens. I am trying to see if the parts would be cheaper than my deductible on my insurance. Any help would be hot. Thanks guys.
  2. Thumpa Husqvarna
    AA Class

    Location:
    san francisco bay area, california usa
    Husqvarna Motorcycle:
    TR 650 Terra
    Other Motorcycles:
    CCM Dakar, G650X
    Open the thread two posts before this one,Support Manuals. Click on the link which takes you to the PDF site for Husky NA. You'll see TR right there. Might be good to know what parts you order price and availability. Wish you well getting this sorted!
  3. Thumpa Husqvarna
    AA Class

    Location:
    san francisco bay area, california usa
    Husqvarna Motorcycle:
    TR 650 Terra
    Other Motorcycles:
    CCM Dakar, G650X
    Actually thread title 'Owners shop and parts manual' - good luck!
  4. thumperstruck Husqvarna
    A Class

    Location:
    Boise, ID
    Husqvarna Motorcycle:
    TR650 Strada
    You guys rock. Thanks a million. Hopefully its less than my deductible. I have never had to make a claim yet.
  5. mario33 Husqvarna
    AA Class

    Location:
    Warsaw, Poland
    Husqvarna Motorcycle:
    TR650 Terra'13 - Lady in Red 2
    Other Motorcycles:
    none
  6. thumperstruck Husqvarna
    A Class

    Location:
    Boise, ID
    Husqvarna Motorcycle:
    TR650 Strada
    So I found all the parts I need except for one. I didnt realize that the Strada has a transponder key. When I wrecked the wire that connects to the lock cylinder for the sensor is snapped in such a way that it isnt repairable. All I actually need is the black plastic piece that goes around the lock cylinder that tells you what position the key is in. The sensor wire is molded into this piece. Called Hall's again they say it doesnt come separate. Still waiting on a response from them about getting a new lock cylinder from Husky. I m sure it will be expensive. So I need ideas. This is the piece I need.
  7. thumperstruck Husqvarna
    A Class

    Location:
    Boise, ID
    Husqvarna Motorcycle:
    TR650 Strada
    This is what I need. But with a wire attached

    Attached Files:

  8. thumperstruck Husqvarna
    A Class

    Location:
    Boise, ID
    Husqvarna Motorcycle:
    TR650 Strada
    Well looks like $215 for the whole lock cylinder from Halls cycles in Illinois. Better than I was expecting.