1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Petrol on hot motor

Discussion in '2 Stroke' started by raysaw, Jun 23, 2014.

  1. raysaw Husqvarna
    AA Class

    Location:
    Australia
    Husqvarna Motorcycle:
    701 Enduro
    Other Motorcycles:
    Kawasaki ZX14R
    Hello fellow Huskers
    I NEED YOUR HELP
    My WR300's tank (2009 model) has become brittle and cracks are appearing all over the under side, meaning when I am riding premix is dripping over my engine. I am told I can't have it plastic welded as it would just slpit somewhere else. BUT, and here's the clinch - replacement tank (genuine is $570 AUS or IMS 3.4 Gallon $390 AUS. Anyone know any cheaper options?
    Thanks
    Raysaw
  2. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    Flush the tank and leave the cap and petcock off, if you can find where the cracks are, look for the start and finish of the cracks and drill small hole to stop the crack from spreading.

    With the tip of a hot soldering iron, gouge out the length of the crack enough to fill. If you can get some Q-Bond adhesive, fill these gouges with the Q-Bond and it's good as gold. You can use kneedit or quiksteel as well but you'll need to roughen up the surround area if you want it to strongly stick.
    I've sealed a crack on my tank with QBond for over 2 years and no leak...now the petcock on OTOH :mad:
    bax3 and raysaw like this.
  3. raysaw Husqvarna
    AA Class

    Location:
    Australia
    Husqvarna Motorcycle:
    701 Enduro
    Other Motorcycles:
    Kawasaki ZX14R
    Thanks OMG - I'll give it a try and report back - Champion.
  4. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    give BMP or Halls an email & check their prices. be a hell of a lot cheaper even factoring in shipping! ask on classifieds here also:thumbsup:
    raysaw likes this.
  5. rabskyline Husqvarna
    AA Class

    Location:
    Sunshine Coast,Queenslander !!
    Husqvarna Motorcycle:
    2014 te250r
    Other Motorcycles:
    Yer maw !
    New tank or potential fuel bomb, new tank wins.
    raysaw likes this.
  6. raysaw Husqvarna
    AA Class

    Location:
    Australia
    Husqvarna Motorcycle:
    701 Enduro
    Other Motorcycles:
    Kawasaki ZX14R
    Thanks mate - Who are BMP or Halls? I want to call them but cant find.
  7. shrubitup Husqvarna
    AA Class

    Location:
    Seattle WA
    Husqvarna Motorcycle:
    '00 TE610 (pretty much a WXE610)
    Other Motorcycles:
    Husaberg FE450, KTM 200EXC, Triumph
  8. raysaw Husqvarna
    AA Class

    Location:
    Australia
    Husqvarna Motorcycle:
    701 Enduro
    Other Motorcycles:
    Kawasaki ZX14R
    Update:
    Attempted repair as per suggestions above using a range of flexible polyethylene capable products but the tank is just too brittle. Spent the other day thinking I had finally got it right but then noticed my boots were wet.............. Engine covered in premix. Local Husky dealer said it was unusual for a tank to become brittle in such Got a quote from Halls at $349 US delivered - which was great but my local shop has near matched it. Oh well, bike has been very good to me so I shouldn't complain. Just thought I would pass on my personal experience.
    ohmygewd and rabskyline like this.