phone tech support on 08 te610 ibeat

Discussion in 'EFI/carb' started by 04asphalt, May 8, 2011.

  1. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    got the use of a cable from ion so is anyone willing to give tech support if needed when I start making adjustments?
    PM a contact number and times of day
  2. seymore Husqvarna
    AA Class

    Location:
    Boise, ID
  3. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    email sent...

    does it matter if the air filter isn't freshly cleaned?
    was set at 105%, 02 sensor hole plug was all black but this is the plug
    View attachment 8841 IMG_0006.JPG IMG_0006.JPG
  4. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    I know you told me the 08 only reads F1 but playing around F2 & F3 do seem to have an effect???
    TPS reads 996 at close and 4360 at full. pushed read then set at close.???
    raised to 110 per the look of the plug.??
  5. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    set to 110% from 105% - starts easier and 3/4 to full throttle in high RPM's is now much imprproved.
    cutting throttle after a full twist almost seems to stall the motor
    lower RPM's may not be as crisp and notice no power increase from 105%

    set TPS via ibeat but not real comfortable adjusting mech. throttle

    any advice welcome....
  6. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan

    plan to set at 107.5% and try again, sound okay?