1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Piston Side Clearance

Discussion in '2 Stroke' started by timpjr, Jul 6, 2012.

  1. timpjr Husqvarna
    A Class

    Location:
    Sparks, NV
    Husqvarna Motorcycle:
    93 WXC 360
    Other Motorcycles:
    EVT America 3000w Scooter
    So I'm finally assembling my motor and I find this piston to rod clearance, a bit excessive... Or is this correct ?

    photo.JPG
    timpjr, Jul 6, 2012
    #1

  2. johnnyboy Husqvarna
    Pro Class

    Location:
    UK
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    TM 250f
    It will all become centalised when assembled ! so yes all is good to go
    johnnyboy, Jul 6, 2012
    #2

  3. R-J van Hulst Husqvarna
    Pro Class

    Location:
    Cambodia
    Husqvarna Motorcycle:
    WR 125 + 40 = WB 165 and a SM165
    Other Motorcycles:
    Honda CB 400 Vtec 3
    there will be no sidewards movement possible when the piston is in the cylinder so no dramas here

    Robert-Jan
    R-J van Hulst, Jul 6, 2012
    #3

  4. Poopy Husqvarna
    AA Class

    Location:
    Kamloops, BC
    Husqvarna Motorcycle:
    WB165
    I was worried about the same thing....I put it together and it seems to work fine.
    Poopy, Jul 9, 2012
    #4