125-200cc plastics- years interchangeability - is that a word?

Ive got an 04 cr125 and liked the looks of my 05 tc much more. Im fairly sure i can bolt up 05 fenders but what about the rad shrouds or side panels?

I like the front numberplate but putting numbers and backgrounds may look a bit silly as it has the husky logo cutout.

I can tell you that I once purchased 09 tc plastics for my 08 wr and nothing but the front fender would work. Ended up selling whole set back on ebay, but I did double my money

I don't think tc and wr have interchangeable plastic, maybe 09 wr plastic would work
or in the 1st post 05 wr plastic

It will fit but you also have to change the seat and tank to make this happen.

You would need the 06-08 cr/wr 125 or 06-current wr250/300 seat and fuel tank to make upper and lower radiator covers work. You will have to weld a threaded post on the frame as well as change out/relocate the two rubber bushings that the tank rides on to use the newer tank. Then it will all change over. If you don't want to do that much work the 2005 two stroke rear number plates are slightly more modern looking and will fit with the new style rear fender well.

Not trying to hijack this thread but Will any newer years fit on a 07?

That would be a great start, so get 05 rear fender and side numberplates. That will all bolt on? You are correct i do not want to replace the tank and have to do any welding and what not. Just was looking for any cheap and easy ways to improve it.

Thanks alot

You can buy rear number plates but they won't be plug and play. They are not made for the old style seat so they would need a lot of modification to fit with the old style seat.
Also they won't fit at all with the old style tank plastic.

I had some newer style plastic lying around and thought about doing this but it's just going to be very ugly and wouldn't line up at all.

The 05 rear plates are specific to the 05 model year and will work with older style shrouds and new style rear fender. You are correct that the new number plates will not work with old shrouds.

http://motoplasticsus.com

I have wr 125 -08 plastics, tank, seat on My wr 360 -2000. Direct bolt on, just have to change tank thread and Those rubbers under tank. Like Drtrider82 Said.

As Plastics are hard to find i suggest to convert a pre 2000 Bike with a 2000 onwoards plastic kit, subframe 00- (or a modded stock subframe), tank and seat, if u go for the latest plastics u ll need to weld a braket on top of the Main beam of ur frame.
It s easier to modify the 1995 onwoards bikes than the 1992-94 as u have to cut a re-weld the tank brackets onto the frame.
hardest part would be to modify the subframe- it needs to be narrowed so the plastics and seat will fit- otherwhise it just wont look right- the newer subframes are a Lot slimmer.
Also on some old style radiators u ll have to build a braket to adapt the newer style plastics.
There are a few guys over here which have done the conversion- i haven t got a detailed picture- but its worth the hassle of doing it as u ll get all plastics in all coulors easily.

I would not suggest to convert to the 2013 WR 125 plastics as the frame, subframe are totally different- all other 2 strokes are very similar with only slight modifications to the pre 2000 bikes

Hi all,
I bought member Tgraca 2008 sms125 in October 2015,after he upgraded to a hypermotard SP821 and getting back on topic ,I confirm that I was able to fit the 2009-2014 CR125 side panels.http://www.ebay.co.uk/itm/252149373185?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and the Te510 rear fender http://www.ebay.co.uk/itm/252144609073?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Here are some photos..https://onedrive.live.com/redir?resid=1E3991BEEA5DD19C!112&authkey=!AKtEwie-pWPF0oA&ithint=folder,