250-500cc Platinum or Platinum 2 for my '11 wr 300

I finally smashed in my stocker pipe yesterday so need to get a replacement. I'll likely get the stocker blown out and keep it as a spare, but will likely go w/a pro circuit pipe and silencer. I've read numerous times on this forum that some of you run a platinum 2, but I can't seem to find any for sale on the web. Even pro circuit's web site doesn't offer a P2 for my bike; only the platinum. What's the deal? Where can I get a P2? Is their any difference between the two besides the P2 being constructed using 18 gage steel? I don't want the hassle of maintaining a works pipe either despite their coolness. Thanks!

Pro Circuit doesn't list a P2 pipe on their website for Husky. If you want a heavy guage pipe you could go with an FMF Gnarly...

They stopped making the P2 a while ago. You might be able to find a used one. Mine is banged up and has been repaired once and ready for another repair job.

The Gnarly on my WR250 has taken some big hits that resulted in small dents and ran better on top end and smoother in the middle than the stocker. That said, I have heard the pro circuit is better then the gnarly as far as power goes. I have a new pro circuit that is natural finished waiting for when I finish beating the crap out of my Gnarly. Someday I will give a 1st hand comparison.

Check the code 8000H7925 with your local dealer.
Is the complete exhaust that Husqvarna gives as a power part for your bike and comes straight from Pro Circuit.