Please can someone help before i go insane!

Hi,

i have a 98 610te and it has abit of a problem.(it wont start).

first thing i did was check the spark plug(changed for new and sparks)
second i seviced the carb with all new bits
and third i checked the valve timing(all good)::

Put new fuel in it and it will not start.

Please can someone help as im getting to the point of throwing it away


Be grateful if someone had an idea

Thanks

Rich

Hi

i dont have a compression tester. but the kick start did hit me in the leg and bruise me if that helps

thanks

Is it getting fuel? Is the plug wet after unsuccessful attempts at starting? Is there an in-line fuel filter that´s maybe blocked?

yep fuel is all good.its almost as if some times it sparks and sometimes not.just doesnt want to fire at all

thanks

Maybe put some fuel on the plug and re-insert it and see if it will at least bruise UR leg again

Try pushing it or tying it behind a truck and bump starting it ...

hi guys

have done all of the above with no luck

just really stuck with what to do

what bilf said.....i had exactly the same thing on my 96 610....i realigned and bonded them back in the correct place and she starts and runs well..
plenty of threads on loose mgnets

I agree with this, it sounds like something coming from that side of the engine. Pop off the cover, clean it up and check your magnets!

well i have found the problem.

it was a hair line crack in the cylinder head,so now i need a newone.really gutted.

just been quoted 1500euro for the repair. does a 610tc 98 head fit on a 610te 98 kick start model? please someone let me know as ive found one.

Thanks for all replys guys

cheers

rich

Yes they should fit.