1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Plug gap on br9eix

Discussion in '2 Stroke' started by rpmguy, Sep 28, 2010.

  1. rpmguy Husqvarna
    B Class

    Location:
    Oregon
    Hey are you guys pulling down the gap on the BR9EIX plug in your 125's ?

    Going to try one but noticed they are sending them with factory gap of about .029-.030

    Been running the BR9EG and seems to wear out the electrode after only a few rides on my CR And seems to foul easy from lead.
    rpmguy, Sep 28, 2010
    #1

  2. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    Why are you running leaded fuel in your 2 stroke ? Lead is for protecting valve seats in four strokes. Does nothing for a 2 stroke.
    Vinduro, Sep 28, 2010
    #2

  3. rpmguy Husqvarna
    B Class

    Location:
    Oregon
    No that is just a advantage of the lead, its for octane .
    rpmguy, Sep 28, 2010
    #3

  4. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    Do not gap IX plugs. They are factory set and you can break the electrode trying to gap them.
    MOTORHEAD, Sep 29, 2010
    #4

  5. rpmguy Husqvarna
    B Class

    Location:
    Oregon
    Cool Thanks, does seem a little big. I will try it.
    rpmguy, Sep 29, 2010
    #5