Power Commander & TE610

Discussion in '610/630' started by Jodiesel, Feb 10, 2010.

  1. Jodiesel Husqvarna
    A Class

    Location:
    Aiea, HI
    Husqvarna Motorcycle:
    TE610
    I tried searching, but could not find what I was looking for. Has anyone installed a PC-V and Auto tune on their 08 or 09 TE610? If so, did it give more power or better driveability?
  2. Kevin610 Husqvarna
    AA Class

    Location:
    Hawaii
    PC V and AT

    Yes, I put a power commander on my 09 te-610. I had it ibeated before so it was running pretty good but I still wanted MORE so I installed the PC and AT. It did give it more power but it was not a night and day difference. With the added power, gas mileaged dropped a little. I plan to add the switch so I can change between good mileage and good power. The only problem that I had was that over time the AT kept trying to lean it out at 2% and 5% throttle position so I ended up inputting all zeros in those 2 colums and that fixed it.
  3. Jodiesel Husqvarna
    A Class

    Location:
    Aiea, HI
    Husqvarna Motorcycle:
    TE610
    I assume you have the Leo Vince. With the PC5 and AT installed, do you keep the reisstor plugged into the factory harness?
  4. Kevin610 Husqvarna
    AA Class

    Location:
    Hawaii
    Yes, they even give you the resistor plug when you get the PC5 and AT although I already had one installed from doing the "power up" before buying the PC5. And yes, I have the LV installed also.