1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc power now\ power now plus

Discussion in '2 Stroke' started by hagaiwr, Mar 22, 2010.

  1. hagaiwr Husqvarna
    B Class

    Location:
    israel
    hi guys
    been reading for a while, thanks for the info some of it really helps
    i have a power now monted on my wr125 09 and it really works.
    anyone knows if the plus helps as well?
    i could use some more bark down low....

    and jetting in generel:
    when the weather gets hot- lean or rich?


    thanks
    hagaiwr, Mar 22, 2010
    #1

  2. sean Husqvarna
    B Class

    Location:
    england
    Really, you can feel a difference, i was always under the understanding that they didnt do that much to warrant the money, i put my money in a G2 throttle body and cams, works really well on my 250
    sean, Mar 22, 2010
    #2

  3. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    pn and pn plus on 4t (TXC450) the two made my machine a rock climbing tractor. For 2T I cant say.
    robertaccio, Mar 22, 2010
    #3

  4. hagaiwr Husqvarna
    B Class

    Location:
    israel
    it works for me

    before i installed it there was nothing at the bottom now it's a bit better
    hagaiwr, Mar 22, 2010
    #4

  5. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    does the power now fit both PWK and TMX 38mm??
    rockdancer, Mar 29, 2010
    #5

  6. wallybean Mini-Sponsor

    Location:
    Montana
    You can get them for both carbs but if you have a PWK 38 mm airstriker I can't imagine you needing the carb divider. I put one in my WR250 trying to make the TMX work better. It was a waste of money, it helped a little but didn't really solve the low end/early mid problems especially at altitude. Bolted on a PWK 38 airstriker and all issues went away, no need for the divider.

    Walt
    wallybean, Mar 29, 2010
    #6

  7. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Just a note: I ordered a Powernow over the phone from the manufacturer, and they sent me the wrong item. No problem so much there. Mistakes can happen. So I e-mailed them and explained what happened and that I would call them in the morning. They open at 7 AM Pacific time and close at 3:30 pm and are open for business Monday through Friday. SO Tuesday morning, I was mildly surprised not to see an answer to my e mail. I called them up around 9 and got a recorded message telling me that all the sales people were busy right now, so leave a number and they will get back to me. So I did. An hour later, nobody had gotten back to me, so I called again, got the same message, two hours later I called again, same sh**! Left them another e mail telling them that this was the most extreme form of poor customer service that I had ever heard of. The next morning, Wednesday, they had not called back or answered my e mail, so I had to call my credit card company and put the charge in dispute. It's been almost a week now and I have never gotten a response of any sort from the people at Scaryfast, other than to post my payment to them.:thumbsdown::censored: Beware of these people.:confused:
    Dirtdame, Mar 29, 2010
    #7

  8. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    thanks for that - looks like its PWK then
    rockdancer, Mar 29, 2010
    #8

  9. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    IMHO even with a PWK the divider plates can and do help. It is a mild upgrade but does work with carbs I have done this with.
    Motosportz, Mar 30, 2010
    #9

  10. Phoenix Husqvarna
    AA Class

    Location:
    Oklahoma City, OK
    Husqvarna Motorcycle:
    2009 TXC 450
    Other Motorcycles:
    2 Ducs, 14 GG 200, 13 Husa 300
    I have learned that this is why you ALWAYS use a credit card to buy online and never your bank account. I know some people are anti-credit card, but I have had several disputes and they have always gone to bat for me (and won). Hopefully yours works out the same way.

    I have also been curious about the PowerNow products, but haven't forked out the money to try them.
    Phoenix, Mar 30, 2010
    #10

  11. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    Just had RB do some work on a pwk for one of my bikes , worth every $$$$ . I think this mod would be the cats a$$ on a WR 125. http://www.rb-designs.com/
    TROFFER88, Mar 30, 2010
    #11

  12. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    We will know soon. After talking with you and buddy Ken who had his GG300 PWK carb done i contacted them and will be working on some stuff for the 125 :thumbsup:
    Motosportz, Mar 30, 2010
    #12

  13. surfer1100 Husqvarna
    AA Class

    Location:
    Ottawa, CAN
    Husqvarna Motorcycle:
    09 WR250, Memories of past tiddlers.
    Other Motorcycles:
    TM-01 EN 125, 03 125 MX, 09 EN 155
    I already know:thumbsup:, Mister RB's work is fantastic,the divider plate gives you 36mm low end and regular top end possibly more if you do the 39mm bore. I've noticed the needle is a little more touchy, but the bike is so versatile.
    surfer1100, Mar 30, 2010
    #13

  14. ray_ray Mini-Sponsor

    Location:
    The Philippines
    Husqvarna Motorcycle:
    08\013 WR250, 010 TC250, 012 TC250
    I was just informed by scaryfast people that a PN kit is not available for a 08 TXC250 ...

    Is there anyone else who might sell this product or a similar one?
    ray_ray, Jun 15, 2010
    #14