1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Power valve cable adjusment

Discussion in '2 Stroke' started by creamsodauk, Jan 4, 2015.

  1. creamsodauk Husqvarna
    B Class

    Husqvarna Motorcycle:
    Sms 125
    Other Motorcycles:
    Honda msx, derbi senda 50
    Can anyone help me refitting and adjusting my power vavle cables

    I loosened them up and roved both cables so I could pin the valves open during my electrical issue, I have since replacedthe clocks and want to reinstall and adjust the cables

    Now I know how I too them off and how too get them back on but I have no idea how to adjust the cables? Do I just tighten them up so there's no slack?

    Any help would be great 8-)
    creamsodauk, Jan 4, 2015
    #1

  2. R-J van Hulst Husqvarna
    Pro Class

    Location:
    Cambodia
    Husqvarna Motorcycle:
    WR 125 + 40 = WB 165 and a SM165
    Other Motorcycles:
    Honda CB 400 Vtec 3
    Not having the same motor as you (cable actuated power valve) I would say that cables should not have slack

    they shouldn't have tension either, just no play is the spot in my opinion

    Robert-Jan
    R-J van Hulst, Jan 4, 2015
    #2

  3. creamsodauk Husqvarna
    B Class

    Husqvarna Motorcycle:
    Sms 125
    Other Motorcycles:
    Honda msx, derbi senda 50
    Well that's how I have fitted them for now

    I just don't want to set it up wrong and have it cause damage but I have left a small amount of slack so they aren't taught 8-)
    creamsodauk, Jan 4, 2015
    #3