1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc power valve set up

Discussion in '2 Stroke' started by mark_35, Jun 30, 2011.

  1. mark_35 Husqvarna
    A Class

    hi i have a 2005 wre 125 i was just wondering how to set the power valve up. it seem to come in at the last min the the gear runs out and i have to change then it seems to be abit flat agen before it kicks in agen. any help. cheers mark
    mark_35, Jun 30, 2011
    #1

  2. mark_35 Husqvarna
    A Class

    can any one help?
    mark_35, Jul 1, 2011
    #2

  3. huskydude59 Husqvarna
    AA Class

    Location:
    Berwick
    I would do the jetting first, the power valve should be the last change you should make... And remember it is a 125, i rode one once.. I gott say you guys are special... I cant ride one for shit... too used to grunt...
    huskydude59, Jul 4, 2011
    #3

  4. mark_35 Husqvarna
    A Class

    im gonna strip the carb dwn see wot jettin i have an see were to go from there cheers
    mark_35, Jul 6, 2011
    #4