1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Power Valve Shaft Install Question

Discussion in '2 Stroke' started by Caferacerman, Mar 25, 2014.

  1. Caferacerman Husqvarna
    AA Class

    Screen Shot 2014-03-25 at 7.19.06 AM.png
    Hey Guys,

    Looking at the Power Valves shaft, (B), does the direction of install matter. The document shows the little stopper towards the right and I installed it as such but when I took it apart, I swore it was on the left side - does it matter?
    Caferacerman, Mar 25, 2014
    #1

  2. wallybean Mini-Sponsor

    Location:
    Montana
    I would install it as drawn. JMO.
    wallybean, Mar 25, 2014
    #2

  3. firedog55 Husqvarna
    AA Class

    Location:
    SouthEast, Missouri, USA
    Husqvarna Motorcycle:
    '14 CR150
    Other Motorcycles:
    Yam WR450F, Tri. S3, BMW K12, VTR
    As WB said, I installed mine just as in the diagram. It can only go in one way. Did you have the cylinder upside down?
    firedog55, Mar 27, 2014
    #3

  4. Caferacerman Husqvarna
    AA Class

    Nope - pulled the cylinder off, looked at the manual and what I was looking at and thought, "That's odd..."
    Caferacerman, Mar 28, 2014
    #4