1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Previous owner clearly had something against tensioning bolts :P

Discussion in '2 Stroke' started by mr_manny, Nov 1, 2021.

  1. mr_manny Husqvarna
    A Class

    Location:
    Jalisco, Mexico
    Husqvarna Motorcycle:
    wr250
    Does anyone remember the thread pitch of the rear tensioning bolts?
    Curious before I pull the rear wheel.
    Thanks in advance,
    manny

    missingADJUSTERS.jpg
  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    :eek:
    Wow!
    I want to say that the original bolts are 8mmX1.25...and I'm going to guess that the original bolt is snapped off in the swingarm. I had it happen to my 07 TE450, but I ended up drilling and removing the original bolt. As I recall, it ruined the threads in the aluminum, so I bought an insert kit and rethreaded the thing to original spec.
    mr_manny likes this.
  3. timmygrant08 Husqvarna
    B Class

    Location:
    Chichester
    Husqvarna Motorcycle:
    2005 WR250, 2004 SM450R, 2006 TE250
    Other Motorcycles:
    R1, CRF450XE, Triumph 1200 XE
    M8 x 1.25
    mr_manny likes this.