Pw50 issue

Discussion in 'Non-Husqvarna Motorcycles' started by shawbagga, Feb 26, 2017.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Do these bikes have a clutch/driveshaft adjustment? Bike seems to run ok maybe lacking a bit of pickup from standstill but the rear wheel locks when pushing it with engine off. Can turn the wheel by hand but it turns engine over(can hear & feel compression). Never used to do it so thought clutch or driveshaft may need attention?
  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Finally got around to pulling engine out to check clutch. Found the issue! image.jpg image.jpg
  3. oldbikedude Husqvarna
    Pro Class

    Location:
    Honey Brook Pa.
    Husqvarna Motorcycle:
    1988 wr 430 with cr suspension
    Other Motorcycles:
    66flh,67 CA77,76 CR125M,73H1,74ty250
    That'll do it. All I know is guys would change the springs on the centrificle clutch to speed up or slow down engagement. Good luck.