1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC PWK Carb on te300 float bowl drain mod?

Discussion in '2st' started by HS507, Feb 6, 2016.

  1. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Is there a mod to install a screw with hose to drain float bowl instead of unscrewing cap and gas all over
    HS507, Feb 6, 2016
    #1

  2. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    why?
    or you can turn off gas and run bike, yes there will be a little fuel down in the cap.
    I always run down bowl fuel before loading so it doesn't splash out of the vent tubes.
    my 1980 XR80 has that setup on it........
    robertaccio, Feb 10, 2016
    #2

  3. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Yes i could do this but when i want to rejet and things of this sort its easy to drain with hose screw set up. Spoiled with my yz450 i guess
    HS507, Feb 10, 2016
    #3

  4. KddF1 Husqvarna
    A Class

    Location:
    Arlinghton Heights, IL
    Husqvarna Motorcycle:
    2015 TE 300
    I'm with you HS507! I hate letting my bike idle, so i just shut off the gas an tip her over.
    KddF1, Feb 10, 2016
    #4