Ive got a wr seat which someone has butchered with a hot knife to lower the seat has anyone successfully added a piece of foam to the middle of the seat without having to cover the whole of the seat with new foam thanks
I had the same issue on my old CRF250 that had a lowered seat. I went and bought some of that 3M adhesive and some scrap foam. Then glued it on the seat where I thought it needed some padding. Good thing is that now you can choose your foam density and the shape for your style and comfort. Then finally get a knife and some sand paper to smooth is out and staple the cover back on. Really isn't hard at all, just takes a couple hours and you get a custom cushion.
Thanks - thats what i used -kinda worked ok hard to get the shape and lines neat like the oem seat a little bumpy - may have to put a thin layer of foam over it
hard to get the shape and lines neat like the oem seat I used some sandpaper after carving and it worked great. I don't recall but maybe 100 grit.
I ended up having to put a thin layer of foam over the new cut foam but seat is actually more comfortable than original now I think. Probably better quality foam. Had to get an upholsterer to put cover back on as I wasted time buying a stapler that wouldnt staple the hard plastic seat and also very tight gap to staple. Overall happy with result and way better than old lowered seat
