1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Rear Axle Torque TXC250

Discussion in '4 Stroke' started by JPinNC, Apr 6, 2010.

  1. JPinNC Husqvarna
    AA Class

    Location:
    North Carolina
    Husqvarna Motorcycle:
    2009 TXC250
    Other Motorcycles:
    2009 KTM 300 XC-W
    Honestly, I did a search. What I came up with was 60 ft-lb., 75 ft-lb., 104 ft-lb (!!!). My manual has no torque specs from what I can tell (I looked!). Anyway, is there a general consensus on what is an appropriate torque spec for the rear axle? '09 TXC250

    Thanks, JP
    JPinNC, Apr 6, 2010
    #1

  2. F1ED Husqvarna
    AA Class

    Location:
    Palmdale , CA.
    Pulled this off of the 2008 TXC Service Manual:

    Rear wheel axle fastening nut M20x1,5 142,1 Nm 14,5 Kgm 104.8 ft/lb

    Hope this helps.
    F1ED, Apr 6, 2010
    #2

  3. JPinNC Husqvarna
    AA Class

    Location:
    North Carolina
    Husqvarna Motorcycle:
    2009 TXC250
    Other Motorcycles:
    2009 KTM 300 XC-W
    Whew--that seems like a lot!
    JPinNC, Apr 6, 2010
    #3

  4. demi Husqvarna
    AA Class

    Location:
    Cheyenne, WYO
    Husqvarna Motorcycle:
    12 WR 300
    Other Motorcycles:
    '14 SH 500, 81 Gilera 125 C1, 17 KTM
    you can use 104, but that is quite excessive...75 ft/lbs is plenty.
    demi, Apr 6, 2010
    #4