1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Rear Brake Cleat - Larger?

Discussion in '2 Stroke' started by Jhunter, Jul 3, 2013.

  1. Jhunter Husqvarna
    AA Class

    Location:
    Atlanta
    As most of us know, the rear brake cleat is small and tucked in close to the frame. That bad combo can make for a few heart stopping moments when you need rear brake ASAP... Anyway, I really don't want to heat or bend the brake lever/arm. I'm sure someone makes a larger cleat that will stick out an extra 3/8". Does anyone have some experience with this issue?
    Jhunter, Jul 3, 2013
    #1

  2. ajaxauto Husqvarna
    Pro Class

    Zip Ty Racing 760 244 7028
    ajaxauto, Jul 3, 2013
    #2

  3. Jhunter Husqvarna
    AA Class

    Location:
    Atlanta
    I did some web searching and it sure looks like the cleat off a 2005 YZ250 will work. The design is the same based on how it attaches to the lever. It may need some garage mods to work. Not sure it will stick out any further. I'll call the Zip Ty guys on Monday for their opinion.
    Jhunter, Jul 3, 2013
    #3

  4. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    more info here in this thread I started.http://www.cafehusky.com/threads/wr-250-300-rear-brake-lever-fix.30771/
    454x, Jul 4, 2013
    #4