1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Rear brake pin

Discussion in '2 Stroke' started by Diedrick, Dec 20, 2012.

  1. Diedrick Husqvarna
    A Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    WR250
    Does anyone know if the pin from a KTM will fit on my 2007 WR250? Would be nice to do some riding under the holidays and will not be able to get a OEM in time.
    Diedrick, Dec 20, 2012
    #1

  2. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    I just pulled the pin off my 2009 300XC and it is identical to the pin off 3 different husky 4 strokes. It should be the same, but the wr250 has brakes on opposite sides so maybe it's different.
    Colo moto, Dec 20, 2012
    #2

  3. Diedrick Husqvarna
    A Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    WR250
    Thanks for ur reply, I'll buy one tomorrow and check, otherwise I'll have to wait for a OEM to be sent :-)
    Diedrick, Dec 20, 2012
    #3

  4. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    Most brembo's are universal...just make sure it's not the screw in type...heck if you're good with a lathe, making them is piss easy.

    PS. Lockwire the pin.
    ohmygewd, Dec 20, 2012
    #4

  5. Diedrick Husqvarna
    A Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    WR250
    Was told my bike had a diffrent and older rear brake from the 4 strokes. So I ordered the OEM yesterday anyways, and due to the holidays they delivered the mail today as well(saturday), so I got it in time! :banana:

    Thanks anyways guys!
    Diedrick, Dec 22, 2012
    #5