1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Rear brake reservoir line

Discussion in '2 Stroke' started by webski, May 24, 2013.

  1. webski Husqvarna
    AA Class

    Location:
    Kansas
    Husqvarna Motorcycle:
    83WR250-09TXC450-13WR250-09WR165
    Other Motorcycles:
    KTM 200 XC - Honda XR 440
    Noticed that my rear brake reservoir line runs right up against the stinger on the exhaust. 2013 WR250. Is anyone using any kind of heat shield in this area? I havent ridden the bike yet and I cant see how this isnt going to be an issue.
    webski, May 24, 2013
    #1

  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    yeh i melted a line doin just that. stock pipe was ok but pro circuit wasnt. have you got the rubber joiner between pipe/silencer? maybe a bit of ole rad hose or inner tube. wasnt much fun riding with no back brake! rotate the hose via banjo bolt
    shawbagga, May 24, 2013
    #2