1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Rear disc issue

Discussion in '2 Stroke' started by Kyspeedfactory, Jul 25, 2012.

  1. Kyspeedfactory Husqvarna
    B Class

    Husqvarna Motorcycle:
    2009 WR300
    Well I got a rear Bat Fly disc from Tucker Rocky for my 09 WR300.... Got it home and it is WAY too big...its the same size as my CR125....

    So I went back to work looked it up again...it lists pretty much all Huskys with the same size disc... the CR one is about 9.25" diameter and the WR one is 8.5"....What gives...Should it be the same size? should it really be different?
    Kyspeedfactory, Jul 25, 2012
    #1

  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    The WR 250/300 uses a 220mm rear rotor, the CR 125 uses a 240mm rotor. Most suppliiers assume it is the same but they are not.
    rancher1, Jul 27, 2012
    #2

  3. kris merrill Husqvarna
    AA Class

    Location:
    South East Idaho
    Husqvarna Motorcycle:
    2011 Wr 300 - 1999 Wr 360
    I did the same thing.. I was going to see if I could make a adapter for the caliber . I haven't had time to look I into it yet. I don't think there is anything else on the market for it.
    kris merrill, Jul 28, 2012
    #3