1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc REAR MASTER CYLINDER HELP

Discussion in '2 Stroke' started by gary alger, Apr 21, 2014.

  1. gary alger Husqvarna
    B Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    yz250
    My son was racing sat, and all of a sudden lost his rear brakes, when I looked at it I saw the master
    still intact but the pushrod and pivot, etc gone,,, anyone ever see this before?

    Second wondering if anyone knows what year rear master assy will fit, a bunch of them on ebay..
    gary alger, Apr 21, 2014
    #1

  2. msmith345 Husqvarna
    AA Class

    Location:
    Shawnee, KS
    Husqvarna Motorcycle:
    '12 WR250, '92 360, '80 390
    Other Motorcycles:
    '72 Yamaha R5, '17 SV650
    Picture?

    The push rod piece came off the lever and pulled from the rubber boot on the master?

    What year is the bike?
    msmith345, Apr 21, 2014
    #2

  3. gary alger Husqvarna
    B Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    yz250
    Picture?

    The push rod piece came off the lever and pulled from the rubber boot on the master?

    What year is the bike?

    Pretty much. ^^^ 2013.. Pretty weird something came loose I guess...

    Attached Files:

    gary alger, Apr 21, 2014
    #3

  4. 72racerx Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13 WR144
    Other Motorcycles:
    01 VFR800
    Looks like the heim joint used as part of the pushrod has broken apart as it looks like the center of it is still attached to the lever. It has more than likely taken the rest of the part with it when it broke.
    72racerx, Apr 22, 2014
    #4