1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Rear Sag

Discussion in '2 Stroke' started by PineapplePicker, Jul 8, 2013.

  1. PineapplePicker Husqvarna
    AA Class

    Location:
    Henderson, NV
    Husqvarna Motorcycle:
    2013 WR125
    Other Motorcycles:
    2004 Harley-Davidson FXSTI
    Home Team I've got a dumb question...

    When checking and measuring rear shock sag, should the measuring scale be positioned [in rear axle] perpendicular (90 degrees) to the ground, or close to parallel to the shock axis?

    Thanks,
    R
    PineapplePicker, Jul 8, 2013
    #1

  2. 72racerx Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13 WR144
    Other Motorcycles:
    01 VFR800
    I normally use the rear axle and measure using a point of reference roughly 90deg from the ground.
    72racerx, Jul 9, 2013
    #2
    PineapplePicker likes this.

  3. PineapplePicker Husqvarna
    AA Class

    Location:
    Henderson, NV
    Husqvarna Motorcycle:
    2013 WR125
    Other Motorcycles:
    2004 Harley-Davidson FXSTI
    Thanks, 72racerx. I appreciate your reply. I imagine my question may seem a no-brainier, but I really had no clue and want to do the measurement correctly. Thanks again!

    Rey
    PineapplePicker, Jul 9, 2013
    #3