1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Rear wheel / brake identification help

Discussion in '2 Stroke' started by Steve Hands, Jan 29, 2015.

  1. Steve Hands Husqvarna

    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    BSA Laverda Guzzi Triumph Velocette
    Can anyone help me identify the correct brake plate for this wheel please?
    It was sold to me as a 1989 WR250 wheel. The sprocket has a 155mm centre hole and the bolt c ircle is 175mm. This corresponds to a JTR 510 sprocket which is in their catalogue as being for a 1989 WRK250. http://www.jtsprockets.com/catalogue/sprocket/JTR510

    Several Huskys have very similar looking wheels but wiith differing brake plates. There are a few brake plates for sale on ebay, trouble is, they all have the shoes right up against the plate but my wheel has the brake drum band recessed in by 1" (25mm) from the edge of the hub. The brake drum is 5" (130mm) diameter.

    Any advice, or a pic of what I should be looking for will be much appreciated.
    WR250_Wheel_2.JPG WR250_Wheel_1.JPG
    Steve Hands, Jan 29, 2015
    #1