250-500cc Rear wheel swap over

Does the LHS drive rear wheel(610/630) fit the RHS drive bikes if you get the 220mm disc? Width, axles, spacers the same? Cheers

Was from a 11 te630.

look up the part number for the hub only for the 630 and 300
if they are the same number then yes, might use a different spacer etc.

Diffrent hubs(630 is newer style) so not sure on width n spoke/sprocket offset. Search function on here doesn't seem to work too well. Googled it n seems there's a 5mm spacer required for some hubs but not sure which

Ok so same part number except the 630 hub has an A in it(assuming that is for black paint?).

Wr300-800096937
Te630-8A0096937

So question remains is the spoke lacing different ie shorter spokes to offset n which way if so is it offset?

My stock rear wheel isn't in too bad of condition(needs few new spokes) but be nice to have a spare with a sand tyre on n diffrent gearing but if it means gotta relace wheel then no deuce. Want plug n play

The hubs are the same pattern but the part number with the A is wider, sorry.

Ahh shoot oh well. Thanks rancher