250-500cc rebound adjust

Where the heck is the reboun adjust screw for the '09 WR 300 Sachs rear shoc? Manual says it should be located at the bottom of the shock and easy to access, like all other rear shocks. BUT, I swear I can't find it on this shock. I even had someone else look for it to no avail...Is it located somewhere else on the shock?

Its on the r/h side of the shock just above the linkage bolt. I don't know about 'easy to access', it seems easiest if you take out the linkage bolt and drop the swinging arm slightly.

Thanks windsurf. I will check again.

The easiest way to adjust rebound is to lean over the seat, this helps compress the rear and. Then poke the screw driver on the brake side between the chain and the control linkage you will feel it with the screw driver.. If you ever take out the shock, spin it 180, and you can get it from the gear lever side real easy.