1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

All 2st reed block bits

Discussion in '2 Stroke' started by pvduke, Dec 29, 2010.

  1. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    ya know them pesky lil "tamper proof" bolts they use on our new smokers reed block? i kept forgetting to get a tool for those then...in the impulse bin at an o'riely auto parts i spied a little red dealio...made by michigan industrial,or so labled. cool little two piece rubber block with security bits and an extention, both allen and torx. block is soft rubber and it closes up tight. it was a wopping $2.99. less bits than picutred but, you get the ideer...

    inspect yer reeds often kids.

    Attached Files:

  2. water racer Husqvarna
    Pro Class

    Location:
    http://www.knoxenduro.com Knoxville, Tennessee
    Husqvarna Motorcycle:
    2013 Beta 250RR
    Other Motorcycles:
    2009 Husqvarna WR125 1997 Fantic
    I got the same kit at Harbor Freight, although I hate sending money to China.
    Have you seen any wear on the reeds?
    GP
  3. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    nope- good to go so far. they are a consumeable so i watch them. i'll replace them every other top end. like a battery they might be ok for the time being but fail w/o notice. might never fail as well but.....things hour out. reeds are one of them.
  4. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    That's good to know!