1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc Reed petals

Discussion in '2 Stroke' started by shawbagga, Aug 26, 2016.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Havnt actually inspected them(ever!) but after 110 hours on me 165 figure they may be due?! Had a look on moto tassinari website but no listing. Anyone got a part number or crossover? From memory(coupla years ago) the wr250/300 were same as cr250 v306a or sumthn similar. Not sure if little bikes use same petals?

    Cheers
    NCSteve likes this.
  2. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    I'm interested too. Wouldn't mind having spare pedals for both bikes on hand. Had a look at some point, but can't remember where I ended up :cheers:
  3. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    I have honda CR petals (circa 2000?) on the brain as a x-over?
  4. yakka Husqvarna
    AA Class

    Location:
    West.Australia
    Husqvarna Motorcycle:
    WR300 '09
    Just bought some for the 300 after about 300 hrs. Visibly old ones still ok. 3P682M, same as Honda CR250 86-04. No idea if the same on the small bore.
    shawbagga likes this.
  5. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Damn 300 hours is good yakka mine were chipped after 200 hours but not bad jus edges altho I'm unsure how bad they can get without affectin performance? Didn't want to lunch one so preventative maintenance realy
    juicypips likes this.
  6. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Cr125 maybe?
  7. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    So no noticeable diff with the Honda reeds?


  8. DTX915 Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    kdx200 tt500 yz450 klx125
    Just call Moto Tassinari as the Honda shares the same bolt pattern but not the same reeds. If I remember the Honda sit deeper into the motor.
    NCSteve likes this.
  9. yakka Husqvarna
    AA Class

    Location:
    West.Australia
    Husqvarna Motorcycle:
    WR300 '09
    Exactly same as Husky reeds but about 0.02 -0.04mm thicker.Old ones varied a bit.
    Couldn't notice any difference in performance.
  10. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Il email MT tomoro n ask bout the 125 reeds. Failin that I'll try BMP or halls(altho they not doin oem international anymore). Figured someone must have replaced some recently(ish)?!!
  11. JAM Husqvarna
    AA Class

    Location:
    South Carolina
    Husqvarna Motorcycle:
    2012 WR144
    Other Motorcycles:
    2017 Beta Xtrainer 300
    Hall's has them.
    shawbagga and NCSteve like this.
  12. DTX915 Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    kdx200 tt500 yz450 klx125
    Hall's had to get the them from MT so why pay mark up.
  13. JAM Husqvarna
    AA Class

    Location:
    South Carolina
    Husqvarna Motorcycle:
    2012 WR144
    Other Motorcycles:
    2017 Beta Xtrainer 300
    Dug up my HALL's receipt from 12/15. P/N is 10080077. They were $59.95.

    I am OK if HALLS has a reasonable mark up due to their excellent customer service. I have only ordered from them a few times but was pleasantly surprised at how thorough and knowledgeable they are.

    We are very blessed in upstate South Carolina to have Gerald Jones who owns Upstate Cycle still take care of the two strokes. This past week he split the cases on my WR144 and installed new bearings and seals. I cannot say enough good things about Upstate Cycle, and Gerald's knowledge and interest in helping customers.
  14. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Thanks gents I will try halls n c if they ship to Oz