1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Removal Of Db Killer

Discussion in '4 Stroke' started by Borntoride71, Dec 1, 2020.

  1. Borntoride71 Husqvarna
    A Class

    Location:
    Spain - Castilla y Leon
    Husqvarna Motorcycle:
    2008 TE 250 EU Gone...
    Other Motorcycles:
    2007 WR 250
    How can I remove the OEM Silencer Db Killer

    Its a 2008 TE 250

    Im looking it from behind, and there is no circlip or screw or Snap ring Visible from the back of the Silencer..
    Tried to moved it but no luck at all..

    Any Thoughts ?

    Apart from more noise I know it will make, is there any power or response gains with this removed ?

    Attached Files:

    Borntoride71, Dec 1, 2020
    #1

  2. GrooveThang Husqvarna
    A Class

    Husqvarna Motorcycle:
    2008 TE
    That’s odd. They usually have a snap ring. You should really try to find an Arrow or FMF. It will run better and lose 4 kilos too!
    GrooveThang, Dec 1, 2020
    #2
    Borntoride71 likes this.

  3. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
    That doesn’t look like the stock 08’ pipe. Stock pipe and the arrow had the same spark arrestor and dB killer with a snap ring. Looks like a frankenpipe. The end cap has been re-welded. Any pics of the whole pipe?
    268fords, Dec 2, 2020
    #3
    GrooveThang likes this.