1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC Repacking/rivet type? For my bikes

Discussion in '2st' started by HS507, Feb 21, 2016.

  1. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Looking to repack my sons 150r and in future my own, what general type rivets/gun do i need? Where do i find one at decent cost? Any tips on repacking ir any of this procedure?
    HS507, Feb 21, 2016
    #1

  2. Billd Husqvarna
    AA Class

    Location:
    Pensacola FL
    Husqvarna Motorcycle:
    1975 CR 360 GP, 2015 TE 250
    On mt TE250 You pull the pipe off and unscrew 4 screws on the other end of the silencer and slide the whole thing out. You dont have to mess with the rivets on the cone
    Billd, Feb 21, 2016
    #2

  3. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    The Uptite ones have end caps that unscrew and then you just repack. Rivets are used elsewhere
    glangston, Feb 21, 2016
    #3

  4. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Yes got it thanks guys
    HS507, Feb 22, 2016
    #4